12.4 Scan
This screen is used to view the date and results of the last scan performed. It may also be used to launch a new scan.
-Press the green colour key to scan the KDG network.
-Alternatively, press the yellow colour key to search for All channels.
12.5 Display
This screen is used to set your receiver according to your TV set screen format and depending on the output selected (HDMI/DVI,YPbPr, or EXT1/2).
- Set values for the following (default settings are underlined):
|
| HDTV output | SDTV output | ||
|
|
|
|
| |
| HDMI/DVI |
| YPbPr | EXT1/2 | |
|
|
|
|
| |
TV Screen Format | 16: 9 |
|
| 4: 3 or 16: 9, depending | |
|
| on your TV set | |||
|
|
|
| ||
|
|
|
| ||
Display format | Full Screen or Pillar Box, or Extended | Auto or Letter Box, or | |||
See table in paragraph 13.5.1. | Centre | ||||
| |||||
|
|
|
|
| |
Resolution | Auto, 1080i, 720p, or 576p | Not adjustable | |||
(always 576i) | |||||
|
|
|
| ||
|
|
|
|
| |
TV SCART Output |
|
|
| RGB (recommended) or | |
|
|
| CVBS, or | ||
| Not applicable |
|
| ||
|
|
|
| ||
AV Control |
|
| On (recommended) or | ||
|
|
| |||
|
|
| Off | ||
|
|
|
| ||
|
|
|
|
| |
- Press EXIT to exit the screen.
12.6 Dolby Digital out of the digital audio output
This screen is used to enable/disable Dolby Digital sound.
When Dolby Digital is disabled, you can still get stereo sound in digital format (PCM).
12.7 Wake up
This screen is used to set the channel to be tuned at the receiver
EN
77
