Philips DMP-BD30 operating instructions Dts/Dts-Hd

“Sound”

Dynamic Range Compression		≥On	≥Off
[BD-V] [AVCHD] [DVD-V] [DivX] (Dolby Digital, Dolby Digital Plus and
Dolby TrueHD only)
Change the dynamic range (> 32) for late night viewing.
Digital Audio Output
≥Press [OK] to show the following settings.
	Priority setting	≥Secondary Audio:
	≥Select priority items for “Digital Audio Output”.	“BD-Video Secondary Audio” is set to “On”, and “Digital Audio Output” is

fixed to “PCM”. ≥Audio Quality:

“Digital Audio Output” is set to “Bitstream”, and ‘“BD-Video Secondary Audio” is fixed to “Off”.

–If the connected equipment can only decode Dolby Digital and DTS, Dolby Digital Plus, Dolby TrueHD, and DTS-HD will be output as Dolby Digital or DTS.

–If the connected equipment can only decode one of either Dolby Digital and DTS, please select “User” and set whichever cannot be decoded to “PCM”.

			≥User:
			Items in “Digital Audio Output” can be set individually. However, these have
			restrictions, as set out in Regarding “User” setting of “Priority setting”
			below.
	Dolby D/Dolby D+/Dolby TrueHD	[Note]	≥Bitstream:
		≥Not making the proper	When “Bitstream” is selected, audio is output as bitstreams from either the
		settings may result in	HDMI AV OUT or DIGITAL AUDIO OUT terminal. Select “Bitstream” when
		noise.	the connected equipment can decode the respective audio format. (The
		≥If the unit is connected with	logo shown on the left is displayed on the equipment.)
		the HDMI AV OUT	≥PCM:
		terminal, the specifications	When “PCM” is selected, these audio formats are output as PCM 5.1ch
	DTS/DTS-HD	of the connected	from the HDMI AV OUT and PCM 2ch from DIGITAL AUDIO OUT terminal.
		equipment take preference	Select “PCM” when the connected equipment cannot decode the
		over this unit and audio	respective audio format. (The logo shown on the left is not displayed on
		selected in these items	the equipment.)
		may not be output (e.g.,
		when a television is
		connected, the HDMI
		audio output of this unit is
		limited to down-mixed
		2ch.)
	MPEG Audio		≥Bitstream:		When connected to equipment with a built-in MPEG
					decoder.
			≥PCM:		When connected to equipment without a built-in MPEG
					decoder.
	BD-Video Secondary Audio [BD-V]		≥On:	The primary audio and secondary audio are mixed and output.
	Turn on/off the clicking sound on the menu and audio with			The sampling frequency is converted to 48 kHz.
	secondary video in picture-in-picture mode. (> 13)		≥Off:	The clicking sound on the menu and secondary audio are not
				output.
PCM Down Conversion			≥On:	Signals are converted to 48 kHz. (Choose when the connected
Select how to output audio with a sampling frequency of 96 kHz.				equipment cannot process signals with sampling frequency of
≥Signals are converted to 48 kHz despite the settings across in				96 kHz.)
	the following cases:		≥Off:	Signals are output as 96 kHz. (Choose when the connected
	– when the signals have a sampling frequency of over 96 kHz			equipment can process signals with sampling frequency of
	– when the disc has copy protection			96 kHz.)

–when “BD-Video Secondary Audio” is set to “On”

[Note]

Regarding “User” setting of “Priority setting”

When playing discs containing clicking sounds on menus or audio with secondary video, all audio including “DTS/DTS-HD” will be output according to “Dolby D/Dolby D+/Dolby TrueHD” settings if “BD-Video Secondary Audio” is set to “On”. In addition, when “Dolby D/Dolby D+/ Dolby TrueHD” is set to “Bitstream”, output will be converted to “Dolby Digital”.

To output audio in original audio format, please set “BD-Video Secondary Audio” to “Off”.

Settings of “Digital Audio Output”	Connected terminal	Audio formats are output as:
≥“Bitstream” is selected.	HDMI AV OUT terminal	Dolby Digital*2
≥“BD-Video Secondary Audio” is set to “On”.	DIGITAL AUDIO OUT terminal
≥“Bitstream” is selected.	HDMI AV OUT terminal*1	The original format
	DIGITAL AUDIO OUT terminal	Dolby Digital or DTS Digital Surround
≥“BD-Video Secondary Audio” is set to “Off”.
		(depending on the original format)
≥“PCM” is selected.	HDMI AV OUT terminal	PCM decoded from Dolby Digital or DTS
≥“BD-Video Secondary Audio” setting is either “On” or “Off”.		(5.1-ch maximum)
	DIGITAL AUDIO OUT terminal	PCM decoded from Dolby Digital or DTS
		(Data of 2.1 channels or more will be
		down-mixed to 2 channels.)

*1 In the following cases, audio is output as Dolby Digital or DTS Digital Surround.

–The connected device does not support Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio.

–Since multiple devices are connected using HDMI cables, operations on the device are restricted.

*2 When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to “Off”.

Regarding 7.1ch LPCM

The settings described below are recommended to output as the original format.

–Connect the unit with the HDMI AV OUT terminal.*3

–Set “BD-Video Secondary Audio” to “Off”. (Otherwise down-mixed 5.1ch PCM will be output from the HDMI AV OUT terminal.)

*3 Down-mixed 2ch PCM is output from the DIGITAL AUDIO OUT terminal, regardless of the “BD-Video Secondary Audio” setting.

(Continued on the next page)

Settings

RQT9038

23