Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and

use.

 

 

 

 

 

 

On the television

 

 

 

 

 

Page

 

 

 

 

 

 

Authorisation Error.

You are trying to play the DivX VOD content that was purchased with a different

16

 

 

registration code. You cannot play the content on this unit.

 

 

 

 

 

 

 

Cannot play.

You inserted an incompatible disc.

4, 5

 

 

 

 

 

 

Cannot play on this unit.

You tried to play a non-compatible image.

18

 

Confirm “SD” on the unit’s display is not blinking and re-insert the card.

 

 

 

 

 

 

No disc

The disc may be upside down.

 

 

 

 

 

 

Rental Expired.

The DivX VOD content has zero remaining plays. You cannot play it.

16

 

 

 

 

 

 

$ This operation is currently

The operation is prohibited by the unit or disc.

disabled.

 

 

 

 

 

 

 

 

 

 

 

 

 

On the unit’s display

 

 

 

 

 

 

 

 

 

 

 

 

F99

The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby

 

 

for 3 seconds. Now press [Í/I] on the main unit again to turn the unit on.

 

 

 

 

 

 

 

HDMI ONLY

Some BD-Video discs can only be output with HDMI.

 

 

 

 

 

 

No PLAY

There is a viewing restriction on a BD-Video or DVD-Video.

22

 

 

 

 

 

 

No READ

The disc is dirty or badly scratched. The unit cannot play.

 

 

 

 

 

 

PLEASE WAIT

Displayed when the unit is started and turned off. This is not a malfunction.

 

The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE

 

 

WAIT” is displayed.

 

 

 

 

 

 

 

 

SET

The remote control and main unit are using different codes. Change the code on the

29

(“ ” stands for a number.)

 

remote control.

 

 

 

 

 

 

 

Press and hold [OK] and the indicated number button at the same

 

 

 

 

D

 

 

 

 

 

 

time for more than 5 seconds.

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNFORMAT

You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or

 

 

DVD-RW (DVD-Video format).

 

 

 

 

 

 

 

UNSUPPORT

You have inserted a disc the unit cannot play.

4, 5

 

 

 

 

 

 

 

U59

The unit is hot.

 

 

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until the

 

 

 

message disappears.

 

 

 

Select a position with good ventilation when installing the unit. Do not block the cooling fan

 

 

 

on the rear of the unit.

 

 

 

 

 

 

 

U72

The HDMI connection acts unusually.

U73

 

– The connected equipment is not HDMI compatible.

 

 

 

– Please use HDMI cables that have the HDMI logo (as shown on the cover).

 

 

 

– The HDMI cable is damaged.

 

 

 

 

 

 

 

H or F

There is something unusual. (The service number displayed after H and F depends on the

 

 

unit’s condition.)

 

27–29

 

Check the unit using the troubleshooting guide. If the service number does not disappear,

 

 

do the following.

 

 

 

 

1 Disconnect the plug from the household mains socket wait a few seconds, then

 

 

 

reconnect it.

 

 

 

 

2 Press [Í/I] to turn the power on. (The unit may be fixed.)

 

 

 

If the service number does not disappear despite doing the above, request service from

 

 

 

the dealer. Inform the dealer of the service number when requesting service.

 

 

 

 

 

 

 

 

Disc and card handling

Clean discs

DO

DO NOT

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).

Do not write on the label side with a ball-point pen or other writing instrument.

Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

Do not use scratch-proof protectors or covers.

Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

Do not use the following discs:

Discs with exposed adhesive from removed stickers or labels (rented discs etc).

Discs that are badly warped or cracked.

RQT9038 – Irregularly shaped discs, such as heart shapes.

Maintenance

Clean this unit with a soft, dry cloth

Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to play discs.

Use the lens cleaner (not included) about once every year, depending on frequency of use and the operating environment. Carefully read the lens cleaner’s instructions before use.

Lens cleaner: RP-CL720E

This lens cleaner is not for sale in Garmany and may not be for sale depending on the region.

This lens cleaner is sold as specific for DIGA, but can be used without problem on this unit as well.

30

Page 30
Image 30
Philips DMP-BD30 operating instructions Messages, Disc and card handling, Maintenance