Philips DMP-BD30 operating instructions Display, TV/Device Connection

RQT9038

24

“Display”

On-screen Messages	≥Automatic	≥Off
Choose whether to show status messages automatically.
On-screen Language	≥English	≥Français	≥Español
Choose the language for these menus and on-screen messages.	≥Deutsch	≥Italiano	≥Nederlands
Screen Saver Function	≥On:
This is to prevent burn-in on the screen.	If there is no operation for 10 minutes or more, the displayed screen
≥When this is set to “On”, the masked-off area on the screen	switches to the other states automatically.
becomes gray.	– When the Direct Navigator or FUNCTIONS menu is displayed, the
[Only when connecting with an HDMI cable or a component	display returns to the screen saver mode.
video cable and “HDMI Video Format” (> below) is set to any	– When CD or MP3 is played, the display returns to the screen saver
other mode than “576p/480p”, or “Component Resolution”	mode. (Playback continues.)
(> below) is set to “720p” or “1080i”]	– When still pictures are shown (except for slideshows), the display returns
	to the Direct Navigator screen.
	≥Off
FL Display	≥Bright
Changes the brightness of the unit’s display.	≥Dim:	The display is dimmed.
	≥Automatic:	The display is dimmed during playback and bright
		except playback.
SD Card LED Control	≥On	≥Off
Set the lighting method for the lamp on the SD card slot.	≥SD inserted:	When this unit is turned on and SD card is inserted, the
		lamp is lighted.
Software Licence	Information about the software used by this unit is displayed.

“TV/Device Connection”

TV Aspect	When connected to a 4:3 aspect television:
Set to match the type of television connected.	≥4:3 Pan & Scan:	Video recorded for a widescreen is played as Pan & Scan
		(unless prohibited by the producer of the disc). When playing
		BD-Video, video is output as “4:3 Letterbox”.
	≥4:3 Letterbox:	Video recorded for a widescreen is played in the letterbox
		style.
	When connected to a 16:9 widescreen television:
	≥16:9:	Video recorded for 4:3 aspect screen is displayed as a 4:3
		ratio image in the centre of the screen.
	≥16:9 full:	Video recorded for 4:3 aspect screen is displayed as a
		horizontally stretched 16:9 image.

HDMI Connection
≥Press [OK] to show the following settings.
	HDMI Video Mode	≥On:	Images are output from the HDMI terminal in the resolution set in “HDMI
	Select “On” when video is output from HDMI AV OUT		Video Format”. Video from COMPONENT VIDEO OUT terminal is output
	terminal.		as “576i/480i”.
		≥Off	Images are output in the resolution set in “Component Resolution”.
	HDMI Video Format	≥Automatic:		Automatically selects the output resolution best suited to the
	The items supported by the connected devices are			connected television (1080p, 1080i, 720p or 576p/480p).
	indicated on the screen as “¢”. When any item without	≥576p/480p		≥720p
	“¢” is selected, the images may be distorted.	≥1080i		≥1080p
		When the unit is connected to an amplifier/receiver that does not support the
		resolution set on the unit, the video cannot be output properly. In this case, use the
		HDMI cable to connect the unit to the TV and then connect the unit to the amplifier/
		receiver using a cable other than HDMI.
	BD-Video 24p Output	≥On:	Images in 24p are output in 24p as they are.
	When playing BD-Video recorded in 24 frames, this unit		(This is effective only when “HDMI Video Format” is set to “Automatic” or
	displays each frame at 1/24 second intervalssthe same		“1080p” and “TV Aspect” is set to “16:9” or “16:9 full”.)
	interval originally shot with the film movie.		However,
	≥This item can be set only when the unit is connected to		–when video is being output at 24 frames, images from any other
	a TV with an HDMI terminal that supports 1080/24p		terminal than the HDMI terminal may not be output properly.
	input.	≥Off	–when images other than 24p are played, images are output at 60p.
	HDMI Output Range	≥Standard:
	Effective when connected to a device that only supports	≥Enhanced:		When the black and white images are not distinct.
	RGB output.
	HDMI Audio Output	≥On:
	This setting selects whether or not to output audio from	≥Off:	When the TV is connected to this unit using an HDMI cable, and this unit
	HDMI.		is also connected to other devices, such as an amplifier/receiver using an
			optical digital audio cable or a coaxial cable.
	VIERA Link	≥On:
	Set to use “HDAVI Control” function when connected with	≥Off:	Select when you do not want to use “HDAVI Control”.
	an HDMI cable to a device that supports “HDAVI Control”.
Component Resolution		≥576i/480i		≥576p/480p
This sets the video output resolution when using the		≥720p		≥1080i
component video terminal.		480i, 480p: When playing NTSC discs
		576i, 576p: When playing PAL discs
		Even if you select “720p” or “1080i”, the video output resolution is restricted to
		“576p/480p” when DVD-Video, DivX and BD-Video discs recorded at a rate of 50
		frames per second is output from the COMPONENT VIDEO OUT terminals.
Speaker		≥Multi-Channel: When using 3 or more speakers. (> 25)
You can set the unit to output the best possible sound for		≥2-Channel:		When using two speakers.
your speakers.				2ch down-mix audio are output from Front L and Front R.
TV System		≥NTSC:		Select when connecting to a NTSC television.
Change the setting to match the equipment you are		≥PAL:		Select when connecting to a PAL or multi-system television.

connecting with.

≥If picture output is not smooth, change the setting.

≥When NTSC contents are played, they are outputted in the signal format specified in the “NTSC Contents Output”, irrespective of the settings here.