Switching off current timer functions
Note
During a timer programme, no key is activated.
To switch off the timer function:
Press the Standby key .
A programme message is displayed.
Press the OK key.
A message telling that the Timer is deleted appears.
5.8Miscellaneous functions Restoring default settings
You can reset the device to default settings. Your Digital Terrestrial Receiver will have all its settings initialized like there were at the first installation.
For example, all the favourite lists created will be deleted.
Press the MENU key. By default, the item Box Settings is highlighted
Press the OK key.
Highlight the item Restore Factory Settings using the arrow key 
or 
, and then press OK.
Set Yes by using 
and then press OK.The device carries out a reboot. It switches off, and shortly afterwards switches on again.
Carry out an initial installation. Refer to chapter Install.
Displaying channel and system information / adjusting the antenna
This function solely serves to supply information on one channel. However, you can use it for adjusting your antenna and for improving the television reception.
Press the MENU key to access the main menu.
Highlight the fourth menu item Technical Information using the arrow key 
or 
,and then press OK. By default, Channel Information is highlighted.
Press OK.
Adjust your antenna so that the two
specifications Signal Strength and Signal Quality display a preferably high value.
Note:
Depending on your antenna, you can possibly carry out settings on your antenna.
Press the EXIT key.
Highlight System Information using the arrow key 
or 
and then press OK. Here you find technical information on your device.This information normally is only relevant with regard to support.
Press the EXIT key three times to return to the TV programme.
24 | Use more of your Digital Terrestrial Receiver |
