Philips DTR 2530 Using your Digital Terrestrial Receiver, Watching live TV, Channel selection

As soon as the scan is completed, a window is displayed. Press OK to close it.

Press OK again.

Now all the available channels are scanned and registered on your Digital Terrestrial Receiver.

Note

If the signal quality is poor, a message prompting you to check your antenna/cable is displayed. Check your cable connections and scan for channels again.

If you do not receive channels that should be available, check also the Coverage of your area: See http://www.freeview.co.uk

4Using your Digital Terrestrial Receiver

Once you have connected your Digital Terrestrial Receiver, use the remote control to operate the basic, frequently-used functions, such as switching on and off, changing channels and altering the volume.

4.1Watching live TV

Digital Terrestrial Receiver wake-up To wake up your Digital Terrestrial Receiver from standby, press one of the following keys and wait a few seconds:

•on the remote control

•P+/P- on the remote control

•Any numerical key of the remote control

Note

In order to reduce power consumption, switch your Digital Terrestrial Receiver to standby mode whenever you are not using it.

For maximum energy saving we recommend you to switch off the Digital Terrestrial Receiver by unplugging the AC adaptor of the Digital Terrestrial Receiver if you are not using it for a long time.

Channel selection

To change channels, use P+/P- or the numerical keys of the remote control.

Press P<P / BACK to return to the previously tuned channel.

E N G L I S H

Using your Digital Terrestrial Receiver 11