Successively select the adjustable values using the arrow key 
or 
.
•The desired Frequency is set with the arrow key 
or 
.
•The frequency in MHz is entered via the numerical keys of the remote control.
Choose whether All channels or channels that are Free to air only are to be searched for.
Then highlight OK and press the OK key to start the manual scan mode.
•If some channels were found, the same message as the one in the automatic scan mode will be displayed. Refer to previous paragraph.
•If no channel was found, a message will be displayed.
Press the OK key.
5.6EPG
The electronic programme guide (EPG) offers you an overview of all programmes to be broadcast in the coming week on the current channel.
Notes
•Not all channels offer an extensive EPG.
•Many broadcasting services broadcast the current day programme but do not offer detailed descriptions.
•There are broadcasting services that do not offer any EPG information.
•Due to the progressive technical development, more and more broadcasting services will extend this offer in the future.
Select the desired channel.
Press the EPG key to call up the electronic programme guide.
Close the EPG by pressing the EXIT key.
EPG offers the following functions:
•If you require more information on a programme, highlight it using the arrow key
or 
and then press INFO.
•You can select programmes earlier or later in the day using the arrow key 
or 
.
•Change to the programme of another day using the green (next day) or the red button (previous day).
•If you want to adopt a programme into the timer list, highlight it and press the TIMER key. Confirm the request by selecting Yes and pressing the OK key.
Note
Detailed information on the Timer can be found in the next paragraph.
22 | Use more of your Digital Terrestrial Receiver |
