5.5Extended installation
Press the MENU key.
Highlight the second menu item Search for Channels using the arrow key 
or 
and then press OK.
After the first installation (refer to chapter Install), it may be required to search for channels again or to add specific channels that are additionally broadcast.
Press the OK key to start the automatic scan mode.
E N G L I S H
Note
In order to carry out an extended installation, you have to reset the device to its default settings. Refer to chapter Restoring Factory Settings.
Two options are available.
Automatic Search
This scan mode is usually the appropriate one, because normally all channels are found automatically.
Highlight Automatic Search and then press OK.
Using 
or 
, choose whether:
•The channels found are to be added to the old list (standard setting),
•The old channel list is to be overwritten,
•The new found channels are to be discarded.
Press the OK key.
Manual Search
This type of scan mode enables the specific search for an individual channel.This is particularly interesting if you only want to include one individual channel into your channel list and you know the accurate information on the channel and frequency.
Highlight Manual Search and then press OK.
Use more of your Digital Terrestrial Receiver | 21 |
