Philips DV900VHS0I owner manual OptionalHookupscontd13, Back of Stereo, Example only

OptionalHookups(cont'd)13

Connectin_g to a TV and a Stereo

TV has Component Video In lacks

•Set DOLBY DIGITAL and DTS to OFF on the DVD/VCR. Detailsare on pages68-69.If you playa DVD when the settingsare wrong, the sound will be distorted or you maydamagethe speakers.

I

DVD/VCR

0'		2
COMPONENT
VIDEO IN
_	Cb/B-Y
_	Cr,ql-Y
Back ofTV
(example	only)	Back of Stereo
I		(example only)

Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.

2

Connect the red and white audio cables to the red and white DVD/VCRAUDIO OUT Jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors to the jack colors.

3

Connect an optional component video cable to the COMPONENTVIDEO OUT jacks on the

DVD/VCR and to the COMPONENTVIDEO IN jacks on theTV.

4

Plug in the Stereo's power cord.Turn on the Stereo and select the Stereo's Auxiliary IN station. During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner'smanual for details,

5

Plug in theTV's power cord.Turn on the'iV and set it to the ComponentVideo In channel, which usually is located near channel 00. DuringAudio CD playback,you may checkthe statusofAudio CDs on yourTV screen.During DVD playback,you will watch the programon the T_. See your"iV owners manualfor details.

6

Connect the DVD/VCR's power cord to a power outlet. Press the POWER button, then press the DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. "HELLO" will appear brieflyon the DVDNCR'Sdisplaypanel.Youshouldsee the DVD logoon the'IV screenbrieflyIf. you do not, checkyour connectionsand make sure the'iV is set to the correct ComponentVideoIn channel.If there isno discin the DVDNCR,"no DISC" will appear on the displaypanel.