Philips DV900VHS0I owner manual AudioLanguage/SoundMode

62AudioLanguage/SoundMode

The DVD/VCR allows you to select a Languagefor DVDs or a

Sound Mode for Audio CDs. Before you begin, put the DVD/VCR in DVD mode.

•Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.

[_ Language

I

Press the DVD button, then press the AUDIO button dur- ing playback, then press the A/v buttons to select the desired language.

•The language can be changed only if multiple languages are avail- able on the DVD.

Press the A/v buttons.

[_uo__ Press the A/v buttons again.

1...

AUDIO I AUDIO 2

AUDIO CD] Sound Mode

I

Press the DVD button, then press the AUDIO button dur- ing playback, then press the A/v buttons until the sound mode you want appears.

•When producers record an Audio CD, they record the sound on two channels - the left and the right.You can choose to hear the sound on the left channel,the sound on the right channel, or the sound on both channels (Stereo).You will select L-CH, R- CH, or STEREO.

m_Ll	.	I _'_	Both right		and left channels
"--_LAuolo _	_	j	are	active	(stereo).
__J_-_			Only	the	right channe}	is active
I		_-_	Only	the	left channel	is active

0 0

ovovcH

I

E3 123123_

U

PHILIPS

-. j

Helpful Hints

If a desired language is not shown after pressing the .AI_" buttons sev- eral times, the DVD does not have that language.

The display will disappear after about 15 seconds.

Some DVDs only allow you to change the language in the Disc menu.

When you use the DIGITALAUDIO OUT COAXIAL jack, the sound mode of audio CDs cannot be changed.