Removing a PC Card
Press the eject button on the left side of PC card slot with the stylus as shown by the arrow, and pull out the PC card while holding onto the end of the PC card removal tape.
Inserting a PC Card (When Using the Paper Holder)
Check the names of the parts of the Paper Holder before beginning work.
Part C
Part B
Part A | PC card cushion |
|
Part D
Screws (4)
1.Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key.
2.Spread apart both ends of Part A of the Paper Holder ( 1 ) and remove it from the Handheld Printer Terminal ( 2 ), and then remove Part C and Part D ( 3 ).
•Remove Part C and Part D using an ordinary screwdriver as shown in the illustration.
2 | 1 | |
D | ||
| ||
| A | |
| 3 | |
1 |
| |
C |
| |
3 |
| |
|
