Attaching the Splash Protect Cover
Attaching the Splash Protect Cover to the Handheld Printer Terminal lets you use it even during inclement weather.
inner cover
Attach the Splash Protect Cover by following the procedure described below.
1.Press the ridged ( 
) portions ( 1 ) of the paper outlet cover while spreading apart the locks on the left and right sides ( 2 ) to disengage them as shown in the illustration followed by opening the paper outlet cover ( 3 ).
1
2 
1 
3
2
2.Slide the lock knobs on the left and right sides of the roll paper holder as shown in the illustration to align at the FREE position ( 1 ), and then push up the ridged ( 
) portion ( 2 ) to open.
•Please note that the positions of the lock knobs on the left and right sides are different.
| 2 |
|
| LOCK | FREE |
1 | 1 |
|
FREE | LOCK |
|
3.Spread apart the bearing supports of the paper outlet cover towards the left and right directions and remove.
4.Attach the inner cover as shown in the illustration. First, insert a tab on one side of the roll paper holder into one of the slits of the inner cover ( 1 ). Next, push down on the opposite side of the inner cover, and insert the tab on that side of the roll paper holder into the slit on that side ( 2 ).
2 |
1 |
