Using the AC Adaptor (AD-S10095AE/AU)
1.Turn off the power of the Handheld Printer Terminal by pressing the power key.
2.Open the jack cover ( 1 ), and then insert the plug of the AC Adapter into the charging jack ( 2 ).
After connecting the power cable to the AC adaptor, plug the other end of it into an electrical outlet.
1 |
2 |
3.Charging begins and Indicator 1 on the Handheld Printer Terminal lights red. Charging is completed when Indicator 1 changes to green. (Charging time is about 8 hours with the power off.)
*The indicator may light even if the battery pack is not installed. Make sure that the battery pack is installed when charging.
Important!
•Securely install the battery pack.
•Charge in a location free of vibrations.
•Use only the dedicated AC Adaptor
•Turn off the power of the Handheld Printer Terminal when connecting the AC Adaptor.
•When the battery pack has been reinstalled with the battery charger still plugged into the Handheld Printer Terminal, always make sure to first unplug the battery charger and then plug it in again.
