Resetting the Handheld Printer Terminal
Resetting the Handheld Printer Terminal is the same as restarting a computer. Performing a reset causes all unsaved inputs and edits to be lost, but data that is already stored in the memory as well as all settings should be unaffected.
Use reset to restore normal operation whenever the Handheld Printer Terminal operates abnormally due to misoperation or some other reason.
Use the stylus to press the reset switch on the back of the Handheld Printer Terminal.
This starts the reset operation.
If reset does not find a memory problem
The Handheld Printer Terminal restarts, and normal operation is restored.
If reset finds a memory problem
A message like the one shown below appears on the display when the reset operation discovers a memory problem.
|
|
|
|
|
|
|
|
|
|
|
|
the program | the program | ||||
key (L) | key (R) | ||||
|
|
|
|
|
|
When this message appears, press the program key (R) to continue with the reset operation. Note, however, that reset may not be successful depending on the condition of the memory. In this case, perform the full reset operation described on the next page.
