5.Close the roll paper holder, slide the lock knobs on the left and right sides as shown in the illustration to align at the “LOCK” position to lock the roll paper holder in position, and then tear off the protruding roll paper.
•Please note that the positions of the lock knobs on the left and right sides are different.
6.Close the splash protect cover as necessary.
•Open the splash protect cover when printing with the printer.
•Close the splash protect cover when using outdoors in the rain and so forth.
| LOCK | FREE |
| 1 |
|
2 |
| 2 |
FREE | LOCK |
|
Important!
•Always print with the roll paper properly installed. Printing without properly installing roll paper can damage the printer.
•If the roll paper should happen to become jammed in the printer, open the roll paper holder by following the procedure described in steps 1 and 3 of the procedure for “Installing the Roll Paper”, and then remove the jammed paper. Be careful not to touch the printer at this time since it may have become hot during the course of printing.
•The printer is not protected against splashing water when the splash protect cover is closed with roll paper present outside the roll paper holder.
•Remove the splash protect cover when not in use. Protection against splashing water is not guaranteed when the splash protect cover has been removed. Store the splash protect cover in a safe location after it has been removed.
•If the end of the roll paper has become curled making it difficult to install the paper, first flatten out the paper by bending it back in the opposite direction before installing.
