Casio IT-3000 manual Connecting the AC Adaptor and Connecting to a Computer

Using the Bridge Satellite Cradle (HA-B61IO)

Connecting the AC Adaptor and Connecting to a Computer

Use the AC adaptor available as an option for the Bridge Satellite Cradle to supply the power to it. Always make sure that the power is being supplied to the Bridge Satellite Cradle by the AC adaptor before performing any type of data communication operation with the Handheld Printer Terminal. The Handheld Printer Terminal draws the power via the Bridge Satellite Cradle during data communication.

1.After making sure that the Bridge Satellite Cradle power switch is turned off, plug the AC adaptor into the AC adaptor jack on the back.

2.Next, after connecting the power cable to the AC Adaptor, plug the AC adaptor into a power outlet.

Power switch (OFF)

When using the RS-232C port

3.After making sure that the Bridge Satellite Cradle and your computer are both turned off, connect the RS-232C interface or USB interface (after removing the cap) on the back of the Bridge Satellite Cradle to your computer with an RS-232C Cross Cable (DT- 887AXA) or USB Cable (DT-380USB).

Attach the cap always when not using the port.

System Status Indicator Lamp

LINE

Communication Indicator Lamp

DATA

Power indicator Lamp

POWER

Power switch (ON)

Power contacts

E-56