Attaching the Splash Protect Cover
5.Close the roll paper holder, slide the lock knobs on the left and right sides as shown in the illustration to align at the “LOCK” position to lock the roll paper holder in position, and then tear off the protruding roll paper.
•Please note that the positions of the lock knobs on the left and right sides are different.
6.Slide the lock knobs ( 1 ) on the left and right sides of the Splash Protect Cover as shown in the illustration and open the cover ( 2 ).
7.Attach the Splash Protect Cover as shown in the illustration.
•Check that the transparent film of the inner cover is at the position shown in the illustration ( 1 ).
•Furthermore, the transparent film may shift from the position shown in the illustration when the roll paper is torn off. Check the position of the transparent film after roll paper has been torn off.
•Check that the tabs on the inside of the Splash Protect Cover (located on the left and right sides) have entered the indentations on the left and right sides of the Handheld Printer Terminal ( 2 ).
8.Close the Splash Protect Cover ( 1 ), and fasten with the lock knobs ( 2 ) on the left and right sides.
| LOCK | FREE |
| 1 |
|
2 |
| 2 |
FREE | LOCK |
|
| 2 | |
| 1 | |
| 1 | |
Transparent film | ||
Splash Protect | 1 | |
Cover bottom plate | ||
| ||
| Indentation | |
2 |
| |
Tab |
| |
1 |
| |
| 2 | |
2 |
| |
