Using PC Cards
PC card compatible with the PCMIA(Type I/II) standard can be installed in the PC Card slot on the Handheld Printer Terminal. Insert a PC card according to the procedure described below.
Attachment of PC Card Removal Tape to a PC Card
There are some PC cards that may be difficult to remove from the PC card slot once they have been inserted. In the case of such PC cards, attach the PC card removal tape provided before inserting the PC card.
PC card removal tape
Direction of insertion
Important!
When inserting a CF card and so forth using the PC Card Adapter, always make sure to attach the PC card removal tape to the PC Card Adapter. If the PC card removal tape is mistakenly attached to the CF card and so forth, only the CF card will come out when the PC Card Adapter is attempted to be removed, preventing the PC Card Adapter from being able to be removed.
Inserting a PC Card (When Using the Roll Paper Holder)
1.Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key.
2.Turn over the Handheld Printer Terminal.
3.Loosen the two screws shown in the illustration (the screws cannot be removed).
