Casio IT-3000 manual Connecting the bar code reader, Disconnecting bar code reader

Connecting a Bar Code Reader (IT-3000M53E/IT-3000M54E2 only)

Connect a bar code reader to the RS-232C interface connector (8-Pin) on the Handheld Printer Terminal.

Connecting the bar code reader

1.Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key. Open the cover of the RS-232C interface connector. ( 1 )

2.Insert the plug of the bar code reader into the connector as shown in the

illustration.( 2 )

1

2

Disconnecting bar code reader

Turn off the power of the Handheld Printer Terminal. Unplug the bar code reader.

E-73