Philips DV900VHS0I owner manual SpecificTimePlayback57, Starting Playback at a Specific Disc Time

SpecificTimePlayback57

Starting Playback at a Specific Disc Time

•Before you begin,place the DVDNCR in DVD mode.

Pressthe DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.

I

Press the DVD button, then press the SEARCH MODE

button repeatedly (three times for DVDs or two times for Audio CDs).

TOTAL TIME: lh231_145s

TIME [ h m s]

I_b_ EARCHFIIME

tart _ Exlq

2

Use the Number buttons to enter the Disc time at which

you want playback to begin.

• Example: I hour, 23 minutes and 30 seconds

I •+10 _+10 '3 •+10 ,+10 ,+10 _0

•To enter zero, press the Number 0 (zero) button or press the I_ button.

• Make sure the time you	enter	is within	the total	time of the	PHILIPS
Disc. If it is not, you will	have	to enter	a different	time.

•if you make a mistake, press the IP button repeatedly until you reach the item you need to correct (hour, minute, or second), then enter the correct information.

TOTAL TIME: lh23m45s

TIME [! h05m30s]

ISEARCHFrlME

Stari _ Exit

3

Within 30 seconds, press the PLAY button. Playback will start at the time that you specified.

Helpful Hint

• Specific time playback is not avail- able with some discs or if MEMO- RY OFF is activated for a DVD. Details are on page 52.