Philips DVD707/781 manual Audio connection, Connect Audio output to TV

English

Connection

Audio connection

Connect Audio output to TV

¦ To use the TV speaker for sound reproduction, connect the audio left and right outputs on the rear panel of the player to the corresponding inputs on your TV with the audio cable supplied.

MAINS

Connecting to an A/V receiver equipment

Digital multi-channel connection provides the best sound quality. For this you need a multi-channel receiver that supports one or more of the audio formats supplied by your DVD player (Dolby DigitalTM , MPEG 2 and DTS). Check the receiver manual and the logos on the front of the receiver.

Connect to A/V receiver with digital coaxial cable

Receiver

MAINS

¦Connect the player’s digital coaxial output to the corresponding input on the receiver using the normal audio or video cable which is supplied.

¦You will need to set the item [AUDIO] in setup menu for adapting your receiver. Please refer to the chapter [Setup Menu] for details.

¦In this case, do not use the player’s audio left and right output.

NOTE:

–If the audio format of the digital output does not match the capabilities of your receiver, the sound will be muted.

Analog connection to a multi-channel A/V receiver with 6CH connectors

¦This DVD player contains a multi-channel decoder. Connect the audio outputs to the corresponding inputs of your A/V receiver with six audio cables. In the Audio output menu, set Analog output to 6 Channels model. (please refer to setup menu in page 22 for details.)

12