DVD System Menu Options (continued)
GENERAL settings (underlined options are the factory default settings)
Screen Saver | A screen saver prevents damage to the TV screen by avoiding | |
| exposure to a static image for too long. | |
| 1) Use ST keys to select one of the options. | |
| { On } | – Select this if you wish to turn off the TV screen |
|
| after playback had been stopped or paused for |
|
| longer than 15 minutes. |
| { Off } | – Select this to disable the screen saver. |
| 2) Press OK to confirm your selection. | |
|
| |
Country | Select the country of your area for auto channel tuning. | |
| (See section “ Step 3: Installation and Setup - Select the country | |
| of your residence”) |
|
Video Output Format The colour system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV set.
1)Use ST keys to select one of the options.
{ NTSC } | – Select this if the connected TV set has the |
| NTSC colour system. It will change the video |
| signal of a PAL disc and output it to NTSC |
| format. |
{ PAL } | – Select this if the connected TV set has the PAL |
| colour system. It will change the video signal of |
| an NTSC disc and output it to PAL format. |
2)Press OK to confirm your selection.
Helpful Hint:
–If a blank/distorted TV screen appears, wait for 10 seconds for the auto recovery.
English
Restore Factory Settings
This option will restore all the settings of this recorder, except for the PIN code.
Restore Factory settings can only be changed when there is no disc in the disc tray.
1) Use ST keys to select { Restore Factory Settings } and press
OK.
A warning message will appear.
2) Select OK in the menu to proceed or CANCEL to abort, then press OK to confirm.
49
