
Troubleshooting (continued)
Problem (Playback) | Solution |
|
|
English
Disc does not play.
Distorted sound coming from a connected
Unable to play DivX movies.
The picture is distorted or black and white during playback.
A DVD±R/±RW recorded on this DVD recorder does not play on a DVD player.
–Insert the disc with the label facing up.
–Wrong region code. The DVD must be coded for ALL regions or Region 2 in order to be played back on this DVD recorder.
–There is no recording on the disc or wrong disc type. Read chapter “Playback - Playable discs” for details.
–Make sure the disc is not scratched or warped. Clean the disc or replace a new one.
–Check if the disc is defective by trying another disc.
–Do not connect any cables from the recorder to the ‘Phono’ input of your amplifier.
–Check that the DivX file is encoded according to the ‘Home Theatre Profile’ mode with DivX encoder.
–Check that the DivX movie downloaded is a complete file.
–The disc does not match with the TV colour system standard (PAL/NTSC).
–The disc is dirty, clean the disc.
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–If a recording is too short, it is possible that a DVD player cannot detect it. Please observe the following ‘minimum recording times’. Recording mode : {HQ} – 5 mins, {SP} – 10 mins, {EP} – 20 mins, {SLP} – 30 mins.
–You have to finalise the DVD±R. Refer to chapter “Playing your recordings (DVD±R) on other DVD players” for details.
There is picture or sound interference with the TV reception.
The message ‘UNKNOWN DISC’ appears.
–Have your aerial or cable TV signal checked.
–
–This message may appear if you insert a disc that may have encountered one of the following:
–Error during recording: The title may be missing.
–Error while changing the title/index picture: The original title/ index picture may be visible.
–Error while finalising or the disc has not been finalised.
59