Philips DVDR3545V RF Modulator Connection, Supplied cables used in this connection are as follows

RF MODULATOR CONNECTION

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below.

1)Disconnect the power cords of the devices from the AC outlet.

2)Make the connection as illustrated below.

3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.

4)Plug in the power cords of the devices to the AC outlet.

5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator.

rear of this unit

HDMI OUT

DVD/VCR

S-VIDEO IN ---AUDIO---OUT

OU

DVD/VCR

S VIDEO IN - AUD O -OUT

L L IN

rear of your TV	L
	R
IN
	IN ---VIDEO---OUT

N R R N --V DEO -OUT

ANTENNA

VHF / UHF antenna

OUT

RF coaxial cable

IN

or

											ANTENNA
											cable TV
	RCA audio						RCA video				company
											RF coaxial cable
			cable				cable
ANT. IN
				R	L			3	4
		TO TV AUDIO IN				VIDEO IN		CHANNEL		ANT. IN

Set channel 3 or 4

rear of your RF modulator

Supplied cables used in this connection are as follows:

•RF coaxial cable x 1

•RCA audio cable (L/R) x 1

•RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Note

•RF modulator is not supplied with this unit. You need to purchase it at your local store.

•The quality of picture may become poor if this unit is connected to an RF modulator.

16 EN