Philips DVDR3545V Timer Recording, Press Timer Use K / L to select New Program, then press OK

TIMER RECORDING

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

•Set the clock before setting a timer programming.

•Insert a recordable disc with enough recordable space.

Note

•If you have not set the clock yet:

Entry screen for the clock setting will appear instead of the timer programming list at step 1. Continue with the step 4 in “Manual Clock Setting” on page 31 before setting a timer programming.

•Use [s / B] to move the cursor to the left and the right in the entry screen for the timer programming.

•If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are the same, the timer recording will start without canceling the recording currently in progress. In this case, the recording of the same channel will be made on both DVD and VCR.

•Cancel the timer-standby mode by pressing

[TIMER SET] before operation for either DVD or VCR. When finished operating, press [TIMER SET] to resume the timer-standby mode.

•In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not currently timer-programmed.

Guide to Timer Programming Display

3	1		2
Timer Programming
JAN/ 2/07 12:00 AM 125.1 SP
SP (1:00)		MON JAN/01 11:00AM
Date	Start	End	CH	6
JAN/02	12:00AM	1:00AM	DTV125. 1
	New Program
			1/1
4			5

1Title of a timer program (Contains date, time, channel, recording mode of the program)

2 Current date and time

3Recording mode, and length of the recording

4 Timer program list

5 Total number of pages and current page (2 pages maximum)

6 Recording media

1Press [TIMER].

2Use [K / L] to select “New Program”, then press [OK].

Timer Programming

MON JAN/01 11:00AM

Date Start End CH

New Program

1/1

3Use [K / L] to enter the date, then press [B].

Date		Start		End
JAN/02	- - : - -			- - : - -
CH		REC To	Mode
DTV125. 1		DVD		SP
			SP	2 : 00

JAN/01

	When pressing [L] at
Daily
	the current date, the
MON-SAT	date will change as
MON-FRI	follows.
	e.g.) January 1st
SAT
FRI
SUN
JAN/31

42 EN