Philips DVDR3545V manual Setting the Clock, Auto Clock Setting

OFF Auto

Manual

5 Press [SETUP] to exit.

6 Press [STANDBY-ONy] to turn off the unit.

This unit will search for the time only when the power is off. Leave it off for several minutes to give this unit time to set the clock.

SETTING THE CLOCK

Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 31.

Auto Clock Setting

This unit can set the time and date automatically by	Press [SETUP] and use [K / L] to
referring to a PBS station.	select “General Setting”, then press
Make sure	1 [OK].
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 27.)	“General Setting” menu will appear.
• If this unit is connected to a cable/satellite box,	Use [K / L] to select “Clock”, then
select the local PBS station on them to set the clock
automatically.	press [OK].

2 “Clock” menu will appear.

3 Use [K / L] to select “Auto Clock

Setting”, then press [OK].

4 Use [K / L] to select “Auto”, then press [OK].

Auto Clock Setting

	If the unit chooses an incorrect PBS channel, set the PBS
	channel manually by following the steps below.
	1	Select “Manual” at step 4, then press
		[OK].
		Use [the Number buttons] or [K / L]
		to enter your PBS channel number,
	2 then press [OK].
		Set Channel No.
Note		CH 1
	3
• The clock may set itself automatically after you
connect the antenna/cable signal and plug in the		Press [SETUP] and turn off the unit.
power cord.
• Only the analog PBS channel signal is effective for
auto clock setting.

• The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off.

30 EN