Philips DVDR3545V manual Settings for AN External Device, Recording from an External Device

SETTINGS FOR AN EXTERNAL DEVICE

Recording from an External Device
Before recording from an external device, refer to the	1
instructions for the connection on page 48.

Recording to a DVD

Press [DVD].

Insert a recordable disc (refer to page 25 on how to insert a disc).

Introduction Connections

It takes a while to load the disc.

Recording to a Cassette Tape

Press [VCR].

Insert the cassette tape with an erase-protection tab intact.

2	Select the appropriate external input
	channel (E1 or E2) by pressing
	[SOURCE] or [CH / ].

• If the external device is connected to the rear of this unit, select E1.

							• If the external device is connected to the front
							of this unit, select E2.
							• If you are connecting the digital video
							camcorder to the DV-IN jack of this unit, refer
							to “DV DUBBING” on pages 50-52.
							• You can also select E1 or E2 channel by using [the
							Number buttons].
							e.g.) For E1, press [0], [0], [1].
							Press [REC MODE] to select a
							recording mode.
							Refer to “Recording Mode” on page 38 for DVD,
							3 or “Recording” on page 104 for VCR.
							Press [DVD REC I] or [VCR REC I] on
							4 the unit to start recording.
							Start playback on the external device
			6	4			5 to record from.
STANDBY ON				4 HEAD HI FI STEREO			For disc:
				ONE TOUC RECORD NG • LONG PLAY			6 recording.Press [STOP C] on the unit to stop
DVD RECORDER / VCR DVDR 3435V	REW F	WD	TOP/E ECT	PLAY R C		CHANNEL
							For cassette tape:
				6	4		Press [STOP/EJECT C A] on the unit
							to stop recording.
							This operation may take a
							while to be completed.
	OP N/CLOS
					DV RECORDER

V R	DVD	STOP	REC
			PL Y	V DEO	L-AUD O-R	DV
			SV
SOURCE

Basic Setup Recording Playback

Editing Function Setup VCR Functions Others

EN 49