Philips DVDR3545V manual Zoom, Marker Setting, DVD-video

SPECIAL PLAYBACK

Zoom Marker Setting

Introduction

1)During playback, press [INFO].

2)Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired zoom factor to zoom, then press [OK].

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

× 1.2

× 1.5 × 2.0

Zoom menu will appear. There are four options

(x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate.

Zoom area will be displayed.

4)Use [K / L / { / B] to select a desired zoom position, then press [OK].

Zoom playback will start.

Note

•When selecting a smaller factor than the current one, the zoom area will not be displayed.

•To exit the zoom menu, press [INFO] again at step 1.

•To cancel the zoom function, select “x1.0” using [K / L], then press [OK].

•You cannot slide the zoomed picture on some JPEG files.

This feature allows you to assign a specific point on a disc to be called back later.

1)During playback, press [INFO].

2)Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the marker list.

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired marker number.

When it reaches the desired point, press [OK].

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

1---

2---

3---

4---

5---

6---

The title (track) number and the time will be displayed.

4)To return to the marker later:

Use [K / L] to select the desired marker number, then press [OK].

Note

•To clear a marker, select the marker number to be cleared, then press [CLEAR].

•All markers will be erased when you operate these operations listed below.

–Opening the disc tray

–Turning off the power

–Record on a recordable disc

• You can mark up to 6 points.

Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

EN 69