Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol.You can use a single remote control to control EasyLink compliant devices that are connected through HDMI.
Note
•Philips does not guarantee 100% interoperability with all HDMI CEC devices.
Make sure that HDMI CEC feature is enabled on theTV and other connected devices (see the user manual of theTV or other devices for details).
1Press 
.
2Select 
, and then press OK.
3Select [Video] > [HDMI Setup] > [EasyLink Setup].
4Select [On] under the following options: [EasyLink], [1 Touch Play], and [1 Touch Standby]. » EasyLink is enabled.
1 Touch Play
When you play a disc, the TV automatically switches to the correct video input channel.
1Touch Standby
When you press and hold 
(standby) on the remote control of this player, this player and all connected HDMI CEC devices (if they support
EN 13
English
