Philips DVP630, DVP632 manual Using the Remote Control to, Operate the Player

Getting Started

Step 1: Inserting batteries into		Step 2:	Setting up the TV
the Remote Control		IMPORTANT!
3		Make sure you have completed all
		the necessary connections. (See
1		pages 7-8 “Connecting TV”).
2		1 Turn on the TV and set to the correct
		video-in channel. You should see the blue
		Philips DVD background screen on the
1 Open the battery compartment.		TV.
2 Insert two batteries type R06 or AA,		➜ Usually these channels are between the
following the indications (+-) inside		lowest and highest channels and may be
the compartment.		called FRONT,A/V IN, or VIDEO. See your
3 Close the cover.		TV manual for more details.
		➜ Or, you may go to channel 1 on your
		TV, then press the Channel down button
Using the Remote Control to		repeatedly until you see the Video In
		channel.
operate the Player
		➜ Or, the TV Remote Control may have a
1 Aim the Remote		button or switch that chooses different
Control directly at the	STOP PL	video modes.
remote sensor (iR) on		➜ Or, set the TV to channel 3 or 4 if you
the front panel.		are using an RF modulator.
2 Do not put any objects		2 If you are using external equipment, (eg.
between the Remote		audio system or receiver), turn it on and
Control and the DVD		select the appropriate input source for
		the DVD Player output. Refer to the
Player while operating
		equipment owner’s manual for detail.
the DVD Player.
		To deactivate Progressive manually
		The progressive scan display present 60
	PREVIEW MUTE	complete frames per seconds, rather than
CAUTION!		30 frames per second of interlaced
		scanning (ordinary normal TV system).
– Remove batteries if they are
		With nearly double the number of line,
exhausted or if the Remote Control
		progressive scan offers higher picture
is not being used for a long time.
		resolution and eliminates bothersome
– Do not use old and new or
		motion artifacts those jagged edge on
different types of batteries in
		moving objects.
combination.
– Batteries contain chemical		To enjoy the full quality potential offered
substances, so they should be
		by progressive scan feature, a progressive
disposed properly.
		scan TV is required.To activate
		progressive function, refer to ‘Progressive
		on pages 28-29.
			13
01-36 DVP630_EU_051	13	18/03/2004,/0510:04_8239AM 210 98393