Philips e9000 manual Programmable Quadpacer specific types only

	English	
	Quadpacer®
	- The Quadpacer 30-second interval timer ensures that you brush
1	all sections of your mouth evenly and thoroughly. At 30, 60 and 90
	seconds, you hear a short beep and notice a pause in brushing action.

These signals tell you to continue with the next section of your mouth.

3

Programmable Quadpacer (specific types only)

The Programmable Quadpacer allows you to customise the Quadpacer in

1 of 3 ways:

-You may choose to keep the default setting of a 2-minute brushing time with the Quadpacer activated.

-You may choose to extend the brushing time by 30 seconds to 2.5 minutes with the Quadpacer activated.

-You may choose a 2-minute brushing time with the Quadpacer

deactivated.

To change the Quadpacer setting:

1Place the handle in the plugged-in charger.

2Press the Dual Speed Control button briefly and note which LED

lights up

.

3Press and hold the Dual Speed Control button. Continue to hold the button while the LEDs slowly cycle through the Quadpacer settings:

,The fourth LED burns green: the 2-minute Quadpacer is active (default setting).

, The top LED burns green: the 2.5-minute Quadpacer is active.