Philips e9000 manual Dual Speed Control, Cleaning, Air-dry only

10English

,The bottom LED burns yellow: the Quadpacer is not active.

4 To select the desired setting, release the button when the LED that corresponds to your choice lights up.

Note: If you select the 2.5-minute Quadpacer, fewer brushings are available from a fully charged battery.

Dual Speed Control

The Dual Speed Control feature allows you to choose between 2 speed

settings: normal speed (‘Max’) for optimum brushing performance or reduced speed (‘Gentle’) when you desire an even more gentle brushing

action.

Each time you switch on the Sonicare, it starts to brush at the normal speed setting.

1To switch from normal to reduced speed, press the Dual Speed

Control button once during brushing.

2To switch from reduced to normal speed, press the Dual Speed

Control button a second time during brushing.

A distinctive two-tone beep indicates that the speed setting has been changed.

We advise you to brush at the normal speed setting to maintain optimal results.

Note:While the Easy-start feature is activated, the Dual Speed feature (Gentle and Max speed modes) does not function.To use the Dual Speed feature immediately, deactivate the Easy-start feature (see section ‘Easy-start’ in this chapter).

Make sure you select the normal speed setting when the Sonicare is used in clinical trials.

Cleaning

Regular cleaning guarantees the best performance and a long life for the appliance.

1Rinse the brush head and bristles after each use. Let the brush head

air-dry only.