Theuser may be prompted tosend the message. If the message is not to
besent FA
,the message will be stored.
5FQandenter the destination phone number (or recall a
numberfrom the Phonebook) - see “Retrieve a Number” page15
FQtwice
6 Theuser may be asked if delivery confirmation is required. If not
requireduse eto select No FQ
.If yes, use eto select Yes
FQ
Thedefault setting for delivery confirmation can be enabled/disabled using
theReport parameter in the Parameters menu.

Text Attachments

Whencreating a text message, it is possible to include attachments.
(Copyrightpermitting)
Toinclude an attachment:
1FromCreate/Edit FQ
,from the pop menu, select Insert
2 Useeto make a selection from the pop-up menu and FQ
to
select.
3 Useeto select the required file to be inserted into the text body,
FQ
Receiving Text Messages
Whena Short Text Message is sent to the phone, the message "Received 1
NewMessage" and the message indicator (N) will flash in the display, with
anaudible tone or vibration. This indicates that a new message has been
received.
WhenRead is displayed FQto read the message. Use eto
navigatethrough the message and to identify the sender and the time
themessage was sent. With the phone number shown FD
Todial the phone number.
Note:If the message indicator is displayed constantly (does not flash) this
indicatesthat the message area is full and you will need to delete old
messagesin order to be able to receive new messages in the future.
38
TextMessages