Philips EB-GD67 Call Charges, Setting the Unit Price, Setting the Maximum Unit Level

Call Information

Call Charges

To maintain control over the cost of calls that are made, the phone can be set to restrict use to a finite number of units overall. (Q)

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service Provider charges for one unit of call time. (Q)

1From Idle F Q, select Phone Option > Call Service > Service Charges > Price/Unit F Q

2F Q to edit the values

At this point you will be asked to enter your PIN2 or Lock code F Q.

3Enter a currency unit (up to three characters) e.g. GBP F Q twice

4Enter a price F Q twice

Setting the Maximum Unit Level

This function allows the user to pre - determine the maximum cost of calls made. (M)

1From Idle F Q, select Phone Option > Call Service > Service Charges > Max Cost F Q

2F Q twice to edit the values

At this point you will be asked to enter your PIN2 or lock code F Q.

3Enter a value (number of units) which is to be the maximum permitted, and the corresponding cost will be displayed

4F Q twice to accept

Note: The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. However, call charge information may not give an accurate reflection of the tariffs charged by your Service Provider.

46