AV5 Digital Set Top Box
| AV 5 |
|
| AV 3 |
|
| IN |
|
| IN |
|
H | V | VIDEO |
| L AUDIO R | S•VIDEO |
G/Y | B/Pb | R/Pr | L | R |
|
Y | Pb | Pr | L | R |
|
AV 4
IN
Connect your Set top Box to the AV5 input.
Connect a Set top Box with 2 Fh RGB output to the H, V, Y, Pb and Pr jacks and to the L and R AUDIO jacks.
Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks and to the L and R AUDIO jacks.
See also the manual of your High Definition Set top Box.
Note: This television is designed to accept high definition signal standards 480p and 1080i, as specified by the Electronic Industries Association standard EIA770.3.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or even combinations of these on your screen, check if the connections are done in the right way:
- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
-for
Multi channel Surround receiver
CENTER
L
AUDIO OUT
R
2
1
&Connect the audio cable to the multi channel Surround receiver
and to AUDIO OUT L and R at the back of your TV receiver box 1.
Note: Turn off the TV and your surround receiver before connecting them. Set the Surround receiver’s volume to minimum.
éIf you want the loudspeakers of your monitor to act as center speaker, also connect an audiocable to the multi channel Surround
receiver and to the SURROUND SOUND CENTER IN at the back of your TV receiver box 2.
“Select Center mode Yes in the Settings, General menu. See p. 11
The loudspeakers of the monitor will now only produce center sound, the loudspeakers connected to the audio receiver will produce Surround Sound. The volume has to be controlled via the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is blocked via the Channel Lock menu (see p. 14).
