Philips FTS6000/12 manual Activate EasyLink control, Map the audio inputs to the connected devices

Activate EasyLink control

Your DVD Home Theatre System supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink- compliant devices. Compliant devices must be connected to this unit via an HDMI connector.

1 Turn on the HDMI CEC operations on your TV and other connected devices. See TVs/devices manual for details.

2 You can now enjoy the EasyLink controls.

One-touch play [ Auto Wake-up TV ] When you connect this unit to devices that support one-touch play, you can control your DVD Home Theatre System and the devices with one remote control. For example, when you press Play on your DVD remote control, your TV automatically switches to the correct channel to show the DVD content.

One-touch power off [ System Standby ]

When you connect this unit to devices that support standby, you can use your DVD remote control to put your DVD Home Theatre System and all connected HDMI devices in standby mode. You can perform one-touch standby using the remote control from any of the connected HDMI devices.

One touch audio input switching [ System Audio Control ]

This unit is able to render the audio signals from the active source. It switches automatically to the corresponding audio input and output the sound from its speaker system.

•Before you can enjoy this function, you have to map the audio inputs to the connected devices.

•You can use any HDMI CEC TV/device remote control to adjust the volume.

22EN

Note

•To enable one touch play function, a video disc must be placed in the disc compartment before operation.

•Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.

Map the audio inputs to the connected devices

Note

•Before you start, ensure that an audio connection has been made between this unit and your TV/ devices.

1 Press DISC.

2 Press OPTIONS.

3 Press V to select [ Video Setup ] in the menu, then press B.

4 Select [ HDMI Setup ] > [ EasyLink ], then press OK.

EasyLink

Auto Wake-up TV

System Standby

System Audio Control

HDMI Input Mapping

•[ Auto Wake-up TV ] and [ System Standby ] functions are turned on by default in the factory.

5 Select [ System Audio Control ] > [ On ], then press OK.

6 Select [ HDMI Input Mapping ], then press OK.