Disc Operations
IMPORTANT!
–This system is designed for regular discs.Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism.
–Do not move the system during playback. Doing so may damage the system.
–Do not push on the disc tray or put any object other than disc on the disc tray. Doing so may cause the system to malfunction.
–DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.
–According to the format requirement of DVD or VCD, some operations may be different or restricted.
Playing discs
1Press STANDBY ON 2 to switch on the system, and then press DISC to select disc mode.
2Power on the TV system and set to the correct Video In channel .
➜ You should see the blue Philips DVD background screen on the TV set.
3Press OPEN/CLOSE to open the disc tray and load a disc.
➜ Make sure the disc label is facing up. For
●Some discs can play automatically. For discs with Table Of Contents, a menu may appear on the TV screen. When the menu is displayed, press 1 / ¡ / 5 / 4 keys to highlight your selection and press OK to confirm. To select a play option, press numeric keys
➜ If the disc is locked by parental control, you must enter your
5Press 38 to start playback.
For MP3
●Load an MP3 disc in the disc tray.
➜ Press DISC MENU to select menu on/off.
Notes:
–Load discs with the label side facing up.
–To ensure good system performance, wait until disc reading is completed before proceeding.
Using the disc menu
For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc.
To select a playback feature or item
●Press 1 / ¡ / 5 / 4 or numeric keys
To access or remove the menu
●Press DISC MENU on the remote control.
English
down.
4Press OPEN•CLOSE to close the disc tray. ➜ “DISC LOADING” will be displayed.
21
