English
Tuner Operations
Manual preset programming |
|
|
| |
| Changing tuning grid | |||
| ||||
1Press TUNER (BAND) repeatedly to select the desired tuner band: FM or MW.
2Press and hold 1 / ¡ on the system or on the remote control to search a radio frequency.
3Press PROGRAM.
➜ “PROG” and “P 00:00” will display.
4Press O / P or numeric keys
5After selecting an address number, press
PROGRAM again to store the radio station.
●Repeat steps
To stop storing the manual preset
●Press 7 on the system.
Note:
– If you attempt to store more than 40 preset radio stations,“FULL” will be displayed.
Selecting a preset radio station
●In tuner mode, press O / P or use the numeric keys
➜ The preset number, radio frequency, and waveband are displayed.
In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas).The preset frequency step in the factory is 10 kHz.
1Plug the AC power cord.
2Press TUNER to select MW mode.
3Press and hold 9 for more than 3 seconds on
the panel.
➜ “STEP XX K” appears.
Note:
–All preset stations will be lost and need to be reprogrammed.
Deleting a preset radio station
1Press O or P to select the preset radio station to be erased.
2Press 7 on the system, “PRESET DELETED” appears on the display.
➜The radio frequency remains on the display.
➜The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one.
●Repeat steps
34
