Philips FWD182 user manual Basic function, Plug and Play for tuner installation, English

Basic function

English

IMPORTANT!

Before you operate the system, complete the preparation procedures.

Switching the system on

●Press STANDBY ON 2or SOURCE.

➜The system will switch to the last selected source.

●Press DISC,TUNER,TAPE or AUX on the remote control.

➜The system will switch to the selected source.

Switching the system to Standby mode

●Press STANDBY ON 2 in the active mode. ➜ The backlight of display is dim in standby.

●The volume level, interactive sound setting, last selected mode, source and tuner presets will be retained in the player’s memory.

Power-saving automatic standby

●As a power-saving feature, the system will automatically switch to standby mode if you do not press any buttons within 30 minutes after a disc or tape has stopped playing.

Demonstration mode

The system has a demonstration mode that shows various features offered by the system.

Activating demonstration

●In Standby , press and hold STOP to activate demo mode.

➜“DEMO ON” is displayed.

➜Demonstration will begin.

Deactivating demonstration

lPress and hold STOP on the system ,or press DISC key, or press STANDBY ON key, until “DEMO OFF” is displayed.

➜ The system will switch to DISC mode.

Note:

–Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.

Plug and Play (for tuner installation)

Plug and play allows you to store all available radio stations automatically.

If plug and play has not been installed

1When you turn on the system,“AUTO INSTALL- PRESS PLAY” will be displayed.

2Press 38 on the system to start installation.

➜“INSTALL” will be displayed and followed by “TUNER” and then “AUTO PROG”.

➜PROG will start to flash.

➜The system will search all radio stations on the FM band, and then the MW band.

➜All available radio stations with strong signal strength will be stored automatically.

➜The system will stop searching when all available radio stations are stored or when the memory for 40 preset radio stations is full.

➜The first preset radio station will play when Plug and Play is completed.

Reinstalling plug and play

1In Standby mode, press and hold 38 on the system until “AUTO INSTALL-PRESS PLAY” is displayed.

2Press 38 again to start installation.

➜ All previously stored radio stations will be replaced.

To exit without storing the plug and play

●Press 7 on the system.

16