3 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________
Serial No. ___________________________
•Insert the right speaker wires to “R”, left speaker wires to “L”.
•Insert the red wires and blue wires to “+”, black wires to
3 Release the socket flap.
Connect FM antenna
1 Connect the supplied FM antenna to the FM jack on the back of the main unit.
Connect speakers
Note
•For optimal sound, use the supplied speakers only.
•Connect only speakers with impedance that is the same or higher than the supplied speakers. (see ‘Speakers’ on page 20)
Connect MW antenna
1 Prepare the MW loop antenna.
Note
•Ensure that the colors of the speaker wires and terminals are matched.
1 Hold down the socket flap.
2 Insert the stripped part of the wire completely.
2 Connect the MW loop antenna to the MW jack on the back of the main unit.
