Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage set on the voltage selector on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the main unit.
1 Connect the AC power cable to:
•the main unit.
•the wall socket.
Prepare the remote control
Note
•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
To replace the remote control battery:
1 Open the battery compartment.
2 | Insert 2 AAA batteries with correct |
|
3 | polarity | sh |
Close the battery compartment. | E n g l i |
3
1 
2
Note
•If you are not going to use the remote control for a long time, remove the batteries.
•Do not use old and new or different types of batteries in combination.
•Batteries contain chemical substances, so they should be disposed of properly.
Auto install radio stations
When you connect power and no radio stations are stored, the unit automatically begins to store radio stations.
1 Connect the unit to the power supply.
»[AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed.
2 Press 
on the main unit to start installation.
»[AUTO] (auto) is displayed.
»The unit automatically stores radio stations with sufficient signal strength.
»When all the available radio stations are stored, the first preset radio station is broadcast automatically.
EN 11
