Other features, Set the alarm timer, Karaoke

Connect a microphone to the MIC 1/2 jack of the unit.

9 Other features

This unit can be used as an alarm clock.The disc, radio or USB is activated to play at a preset time.

1	Ensure that you have set the clock
2	correctly. (see ‘Set clock’ on page 12)
	Press POWER to switch to standby
3	mode.
	Press and hold TIMER for more than 2
	seconds.
	» A prompt to select the source is
4	displayed.
	Press DISC 1/2/3, or TUN or USB to
5	select a source.
	Press TIMER to conﬁrm.
	» The clock digits are displayed and
6	begin to blink.
	Press ALB/PRESET+/- to set the hour.
7	Press /	to set the minute.

8	Press TIMER to conﬁrm.

» The timer is set and activated.

To deactivate or re-activate an alarm timer

1 When the unit is turned on, press TIMER repeatedly.

»If the timer is activated, is displayed.

»If the timer is deactivated, disappears.

Note

•In MP3 link mode, the alarm timer cannot be set.

Tip

•If disc/USB source is selected and the audio cannot be played, tuner is activated automatically.

This unit can switch to standby automatically	ng l i s h
after a set period of time.	E
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
1 Press SLEEP repeatedly until [OFF] (off)
is displayed.

»When sleep timer is deactivated, disappears on the display.

You can connect a microphone (not supplied) and sing along with a music source.

1 Turn MIC LEVEL 1/2 to the minimum level.

3 Press DISC 1/2/3, or TUN, or USB, or MP3-LINK to select the source, and start play.

4 Sing through the microphone.

•To adjust the volume of the source, press VOL +/-.

•To adjust the volume of the microphone, turn MIC LEVEL 1/2.

EN 19