Philips FWM387/12 user manual Troubleshooting

Models: FWM387/12

1 24
Download 24 pages 24 Kb
Page 23
Image 23
11 Troubleshooting

11 Troubleshooting

Manual background Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.

No power

Ensure that the AC power plug of the unit is connected properly.

Ensure that there is power at the AC outlet.

To save power, the unit switches to standby automatically 15 minutes after a play reaches the end and no control is

operated.

No sound or poor sound

Adjust the volume.

Check that the speakers are connected correctly.

Check if the stripped speaker wires are clamped.

Left and right sound outputs reversed

Check the speaker connections and location.

No response from the unit

Disconnect and reconnect the AC power

plug, then turn on the unit again. Remote control does not work

Before you press any function button, first select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the unit.

Insert the batteries with their polarities (+/– signs) aligned as indicated.

Replace the batteries.

Aim the remote control directly at the

sensor on the front of the main unit. No disc detected

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc.

Use a finalized CD or correct format disc. Cannot display some files in USB device

The number of folders or files in the USB device has exceeded a certain limit. This phenomenon is not a malfunction.

The formats of these files are not

supported.

USB device not supported

The USB device is incompatible with the unit. Try another one.

Poor radio reception

Increase the distance between the unit and your TV or VCR.

If the signal is too weak, adjust the antenna or connect an external antenna

for better reception. Clock/timer setting erased

Power has been interrupted or the power cord has been disconnected.

Reset the clock/timer.

Timer does not work

Set the clock correctly.

Switch on the timer.

22EN

Page 23
Image 23
Philips FWM387/12 user manual Troubleshooting