Philips H982NUD user manual DVD/VCR to a TV and a Stereo, Check your Stereo manual for details

H982NUD_EN1 3/2/06 6:56 PM Page 13

Hookups (cont’d) 13

DVD/VCR to a TV and a Stereo

1 Antenna/Cable

TV Signal

DVD DVD/VCR VCR

DIGITAL	AUDIO	S-VIDEO	COMPONENT	AUDIO OUT
			VIDEO OUT		ANT - IN
AUDIO OUT	OUT	OUT
			Y	L	L
	L		CB /
				R	R
COAXIAL			PB
	R			VIDEO OUT VIDEO IN	ANT-OUT
			CR /
			PR

English

VIDEO IN

3

	AUDIO (LEFT) IN
2	AUDIO (RIGHT) IN

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors.

3 Connect the supplied yellow video cable to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use Component Video cable or S-Video cable instead for the DVD player, see page 12.You will still need the yellow video cable or RF coaxial cable for VCR features.

4 Connect the power cords of the DVD/VCR,TV and Stereo to a power outlet.Turn on the TV and set it to the Video In channel. Or, simply go to your TV’s lowest channel (02 or 03) and continue changing channels downward at the TV until you see VCR or DVD playback on the TV screen.

To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no disc in the player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Video In channel.

Turn on the Stereo and set it to the correct Auxiliary or Source mode.

Check your Stereo manual for details.

5 You are ready to turn on the DVD/VCR. Go to page 16 before turning on the DVD/VCR.