Philips H982NUD Video Cassette Playback, Read and follow the steps below to play a tape

H982NUD_EN1 3/2/06 6:56 PM Page 17

Video Cassette Playback 17

Read and follow the steps below to play a tape.

1 Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO IN channel. This depends on how you connected the DVD/VCR to a TV.

Details are on pages 8-14.

2 With the DVD/VCR power off, insert a tape in the cassette compartment of the DVD/VCR. VCR light will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, playback will start automatically.

If the DVD/VCR power is already on, press VCR to put the DVD/VCR in VCR mode if necessary.VCR light will appear on the front of the DVD/VCR.

3 If playback does not start automatically, press VCR, then press PLAY B.

4 Press STOP C to stop playback.

5 Press h to rewind the tape.

6 After the tape stops, press STOP/EJECT CA on the front of the DVD/VCR to remove the tape.

1 Turn on the TV. Insert a tape in the

2 DVD/VCR.

			STANDBY-ON
	SEARCH	MODE	DISPLAY
	REPEAT REPEAT		AUDIO
		A-B
	SUBTITLE	ZOOM	ANGLE	SKIP / CH
	RETURN	TITLE CLEAR/RESET SLOW
3	VCR	VCR/TV		DVD
	DISC/VCR			SYSTEM
	MENU			MENU
5		OK
4	STOP	PLAY		PAUSE
	TIMER SET	MARKER		RECORD

SPEED

1 2 3

English

4 5 6 7

8 9 0 +10

6Press STOP/EJECT C A

on the DVD/VCR.

Helpful Hints

•Other tape playback features are on pages 31-34.

•If AUTO REPEAT is ON, playback will begin when you insert a tape, even when the record tab is intact. Details are on page 31.

•You must connect the DVD/VCR to a TV using the RF coaxial cable or the audio/video cables in order to use the VCR features. These hookups are explained on pages 9 and 12.