H982NUD_EN2 3/2/06 6:48 PM Page 62

English

62 Helpful Hints (cont’d)

You cannot change the camera angle of a DVD.

The DVD might not contain segments recorded from different camera angles. See if multiple angles are available by referring to the disc case or DVD disc menu. Details are on page 42.

You cannot change the audio or subtitle language of a DVD.

The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or subtitles in multiple languages. See if other languages are available by referring to the disc case or DVD disc menu. Details are on pages 42-43.

An X appears in the top right corner of the TV screen when you try a DVD feature.

The operation is not available at the current time or the feature is not available on the disc. Some features are only available during playback. Others can be accessed only if playback is stopped.Try stopping or playing the disc, then try the feature again.

The DVD/VCR switches from DVD mode to VCR mode after 30 minutes of no activity.

When AUTO POWER OFF is set to ON, the DVD/VCR switches itself from DVD mode to VCR mode if disc playback stops for more than 30 minutes and you press no buttons on the remote or the DVD/VCR. Details are on pages 58-59.This prevents possible damage to your TV’s picture tube that can occur if a still image is left on too long.

A screen saver appears on the TV screen during DVD mode.

• The DVD logo will appear on the TV screen when you stop disc playback.You cannot remove it.

You want to use the DVD player during a VCR timer recording or while “” appears on the display panel.

Press STANDBY-ONy to turn on the DVD/VCR. Press DVD to choose DVD mode, then continue with other DVD features as described in this manual.

A maximum of 999 MP3/JPEG files can be recognized.

Power Failure

Clock setting, language selection and channel setup may be lost if the power fails. See pages 21-23 to set up the channels, clock and language again.

The VCR will not record a TV program.

• Put the DVD/VCR in VCR mode. Press VCR or SOURCE so VCR light appears on the front of the DVD/VCR.

Check the connections between the DVD/VCR,TV, antenna/Cable TV signal and Cable Box/Satellite Receiver (if applicable). Details are on pages 9-14. For VCR features, you must connect the DVD/VCR to a TV with the RF coaxial cable or the yellow video cable as described on pages 9-12.

Make sure the video cassette has a record tab. Details are on page 24.

The VCR will not perform a timer recording.

Make sure the recording start and stop times are set correctly. Details are on pages 28-29.

Make sure a tape is in the VCR and the tape has a record tab. Details are on page 24. If, after programming a timer

recording, you press TIMER SET without putting a tape in the DVD/VCR,“ ” will blink on the display panel.

• If the record tab on a tape is missing, the DVD/VCR will eject the tape.“ ” will blink.

Press TIMER SET to put the DVD/VCR in standby mode for the timer recording.

Make sure the VCR clock is set. Details are on page 22.

• The VCR may not perform or continue a timer recording if the power fails.

If you have a Cable Box/Satellite Receiver, set timer recordings differently. Details are on page 10.

Finish programming a timer recording at least 5 minutes before it is set to begin.

12 p.m. is noon; 12 a.m. is midnight.

There is no picture or the picture is noisy or has streaks during video cassette playback.

• Put the DVD/VCR in VCR mode. Press VCR or SOURCE so VCR light appears on the front of the DVD/VCR.

If you used the supplied RF coaxial cable to connect the DVD/VCR to the TV, make sure the TV is on the same channel as the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when you receive it.To change it to channel 4, see page 9. Make sure channel 03 or 04 is properly adjusted at the TV.

Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct Video In channel at the TV. Details are on pages 8 and 12.

Adjust the tracking. Details are on page 33.

TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR away from the TV.

The Number buttons won’t work for TV channels above 69.

Enter channel numbers as a 2-digit number. If you want to select channels 100 and above, enter channel numbers as a 3-digit number. If you do not have Cable TV, only channels 2-69 are available.

TV programs cannot be watched normally.

Check the connections between the DVD/VCR,TV, antenna/Cable TV signal and Cable Box/Satellite Receiver (if applicable). Details are on pages 9-14.

Poor reception

You may need to tune your TV again. Or, reset channels at the VCR using CHANNEL SET UP. Details are on page 21.

Page 62
Image 62
Philips H982NUD user manual Helpful Hints cont’d

H982NUD specifications

The Philips H982NUD is an innovative hair dryer that combines advanced technology with user-friendly features, designed for both professional and home use. This model stands out in the market due to its remarkable efficiency and performance, making it a favorite among beauty enthusiasts.

One of the main features of the Philips H982NUD is its powerful motor, which ensures rapid drying while minimizing heat exposure. This is particularly important for maintaining hair health, as excessive heat can lead to damage over time. The dryer operates with a range of heat and speed settings, allowing users to customize their experience based on hair type and styling needs. With precise control, users can choose lower temperatures for fine or damaged hair and higher settings for thicker textures.

Another significant technology integrated into the Philips H982NUD is the ThermoProtect feature. This innovative technology helps regulate the temperature of the airflow to prevent overheating, ensuring that your hair remains at a safe temperature while drying. This not only protects hair from potential damage but also enhances shine, leaving locks looking healthy and vibrant.

The design of the H982NUD is both functional and aesthetic. It features an ergonomic handle for comfortable grip during use, reducing fatigue even during prolonged styling sessions. Additionally, the hair dryer is relatively lightweight, making it easy to maneuver. A long power cord adds to the convenience, providing ample reach while styling without the hassle of being tethered to a wall outlet.

The H982NUD also comes with an assortment of attachments that enhance its usability. The included concentrator nozzle allows for precise styling, making it easier to create sleek, straight looks or add volume through targeted airflow. A diffuser attachment is also available, perfect for enhancing natural curls and waves without disrupting their formation.

Overall, the Philips H982NUD hair dryer is distinguished by its balance of power, technology, and design. Its user-centric features make it an essential tool in any hair care routine, whether at home or in a salon. With a focus on hair health, ease of use, and versatility, the Philips H982NUD sets a high standard in the hair dryer market, catering to a diverse range of styling needs and preferences.