Repeat Playback, Tape Counter

H982NUD_EN1 3/2/06 6:56 PM Page 31

Repeat Playback 31

Follow the steps below to play a videotape repeatedly.

	Press VCR, then press DISC/VCR MENU so MENU
	1 appears.
	2 Press K or L to select AUTO REPEAT.	1
	Press B so ON appears next to AUTO REPEAT. Tape	1
	Press B so ON appears next to AUTO REPEAT. Tape
	playback will begin immediately. AUTO REPEAT B will appear on
	3 the TV screen briefly. (If you are fast forwarding or rewinding the

Bto begin tape playback.) The tape will play to the end, rewind, 2-3then play again. (TV programming will appear on the screen while

the tape is rewinding.)tape, press CLEAR/RESET to remove the menu, then press PLAY

English

Follow the steps below to reset the VCR’s real-time tape counter to 0 at a tape location you want to refer to later.

	Press VCR, then play, fast forward or rewind a tape
	to the location that you would like to refer to later.
1 Press STOP C to stop the tape.
2	Press DISPLAY to see the status display.
2	STOP

SLP 1 : 23 : 45 HIFI

3 While the counter is on the screen, press CLEAR/RESET to reset the counter to 0.

STOP

SLP 0 : 00 : 00 HIFI

4	When you later want to return to this point on the
	tape, press DISPLAY so you can see the counter
	(while tape playback is stopped). Press h or g.

As the tape rewinds or forwards, watch the counter.When it reaches 0, press PLAY B to play the tape.

SPEED

•You may only set the counter to 0 at one location at a time. Setting the counter to zero at a second location will erase the previous 0 setting.

•If you remove the tape, the counter will reset to 0 at the point at which you last stopped playback whenever you reinsert the tape.