Philips HD4751 manual Timer, Setting the rice ready time for the rice cooking functions, Cleaning

English 13

Timer

You can use the timer for the rice cooking functions and the steaming, soup cooking and congee cooking modes.

Press the TIMER button to set the time when you want the food to be ready to eat. You can set a time from 0 minute up to 23 hours.

Setting the rice ready time for the rice cooking functions:

1Press the MENU button to select the desired rice cooking function.  (Fig. 25)

2To set the rice ready time, press the TIMER button once and then use the HR and/or MIN buttons to set the time.

,, You can for example use the TIMER button to set the rice ready time at 18:30 hours (Fig. 26).

3Press the COOK/REHEAT button to start the timer and cooking process.  (Fig. 27)

The cook/reheat light blinks and timer light burns continuously.The display shows the current time. To view the preset time, press the TIMER button once.

When the cooking process starts, the cook/reheat light starts to burn continuously and the timer light goes out.

If the preset time is shorter than the required total cooking time of the selected cooking function, the rice cooker will start the cooking process immediately.

Setting the ready time of congee, soup or steamed dishes:

1Press the MENU button to select the congee cooking, soup cooking or steaming mode.  (Fig. 28)

2Press the COOKING TIME button to set the desired cooking time. For cooking times see section ‘Cooking congee’,‘Cooking soup’ or ‘Steaming’ (Fig. 29).

3Follow steps 2 to 3 under the heading ‘Setting the rice ready time’ above.

Clock

To set the current time:

1Plug in the rice cooker.

2Press the HR and MIN buttons to set the time. The time on the display starts to blink.

You can put the time forward quickly by holding down the HR or MIN button. The time cannot be adjusted during the cooking or keep-warm process.

3To confirm the time, do not press any key for 5 seconds after setting the time.The time has been confirmed when the time indicated on the display stops blinking.

Cleaning

Unplug the rice cooker before starting to clean it.

Wait until the rice cooker has cooled down sufficiently before cleaning it.

To protect the non-stick coating of the inner pot, do not: -- use the inner pot for washing dishes;

-- put vinegar into the pot.

1Take the steam tray and the inner pot out of the body of the appliance.

2Detach the inner lid from the outer lid by pressing the lid release tabs and pulling the inner lid outward and downwards.  (Fig. 30)