Using the Machine for the First Time

Insert the plug of the other end of the power cord into a wall socket with suitable power voltage.

Make sure the control dial is on the “” position.

Press the ON/OFF button to turn the machine on; the “ “ light will begin to ﬂash quickly indicating that the circuit has to be primed.

When using the machine for the first time, the following activities need to happen:

1)You need to prime the circuit.

2)The machine will perform an automatic rinse/self-cleaning cycle.

3)You need to initiate a manual rinse cycle.

Circuit priming

During this process fresh water ﬂows through the internal circuit of the machine and the machine warms up. This takes a few seconds.

1Place a container (1L) under the hot water/steam wand or Pannarello (if supplied).