Philips HD8745, HD8743, HD8747 user manual INTENZA+ water filter installation

ENGLISH 15

Turn the control dial to the “” position.

Fill in the water tank again and put it back in the machine. Now the machine is ready for making coffee.

Notes:

When you haven’t used the machine for 2 or more weeks, the machine will automatically perform an automatic rinse/self-cleaning cycle after you have switched on the machine. There after you need to initiate the manual rinse cycle as described above.

The automatic rinse/self-cleaning cycle is also initiated when the machine has been in stand-by mode, or switched off, for more than 15 minutes. After this cycle has been completed, you can brew a coffee.

“INTENZA+” water filter installation

We recommend you to install the “INTENZA+” water filter as this prevents limescale build-up in your machine and preserves a more intense aroma of your coffee.

The “INTENZA+” water filter can be purchased separately. For further de- tails, please refer to the maintenance products page in this manual.

Water is a crucial part of every coffee, so it is very important to always have it professionally filtered. Using the “INTENZA+” water filter will prevent mineral deposits from building up and improve your water quality.

Remove the small white filter from the water tank and store it in a dry place.